S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-76
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
storage (DMM job configuration submode)
storage (DMM job configuration submode)
To add a storage port to a DMM job, use the
storage
command in DMM job configuration submode.
storage vsan
vsan-id
pwwn
port-wwn
{
existing
|
new
}
Syntax Description
Defaults
None.
Command Modes
DMM job configuration submode.
Command History
Usage Guidelines
None.
Examples
The following example shows how to add storage information to a DMM job:
switch#
config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)#
dmm module 3 job 1 create
Started New DMM Job Configuration.
Do not exit sub-mode until configuration is complete and committed
switch(config-dmm-job)#
storage vsan 3 pwwn 1d:22:3a:21:3c:44:3b:51 existing
switch(config-dmm-job)#
Related Commands
vsan
vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
pwwn
port-wwn
Specifies the world-wide name of the storage port. The format is
hh:hh:hh:hh:hh:hh:hh:hh
, where
h
is a hexadecimal number.
existing
Specifies a port on the existing storage.
new
Specifies a port on the new storage.
Release
Modification
3.2(1)
This command was introduced.
Command
Description
show dmm ip-peer
Displays job information.
show dmm srvr-vt-login
Enables DMM.
