Cisco MDS 9000 Series, Command Reference Manual

Page: 561 / 1640

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
8-57
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 8 F Commands
fctrace
fctrace
To trace the route to an N port, use the fctrace command in EXEC mode.
fctrace {device-alias aliasname | fcid fcid vsan vsan-id [ timeout value ] | pwwn pwwn-id [ timeout
seconds ]}
Syntax Description
Defaults
By default, the period to wait before timing out is 5 seconds.
Command Modes EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example traces a route to the specified fcid in VSAN 1.
switch# fctrace fcid 0x660000 vsan 1
Route present for : 0x660000
20:00:00:05:30:00:5f:1e(0xfffc65)
Latency: 0 msec
20:00:00:05:30:00:61:5e(0xfffc66)
Latency: 0 msec
20:00:00:05:30:00:61:5e(0xfffc66)
The following example traces a route to the specified device alias in VSAN 1.
switch# fctrace device-alias x vsan 1
Route present for : 21:01:00:e0:8b:2e:80:93
20:00:00:05:30:00:4a:e2(0xfffc67)
device-alias aliasname Specifies the device alias name. Maximum length is 64 characters.
fcid fcid The FCID of the destination N port, with the format 0x hhhhhh
pwwn pwwn-id The PWWN of the destination N port, with the format
hh : hh : hh : hh : hh : hh : hh : hh .
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
timeout seconds Configures the timeout value. The range is 1 to 10.
Release Modification
1.0(2) This command was introduced.
2.0(x) Added the device-alias aliasname option.