S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
22-361
Cisco MDS 9000 Family Command Reference
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 22 Show Commands
show santap module dvtlun
show santap module dvtlun
To display the SANTap DVTLUN configuration on the Storage Service Module (SSM), use the
show
santap module dvt lun
command
in the EXEC mode.
show santap module
slot
dvtlun {brief | dvt-pwwn}
Syntax Description
Defaults
None.
Command Modes
EXEC mode.
Command History
Usage Guidelines
None.
Examples
The following example displays the SANTap DVTLUN configuration:
switch#
show santap module 2 dvtlun
DVT LUN Information :
dvt pwwn = 22:00:00:20:37:88:20:ef
dvt lun = 0x0
xmap id = 8
dvt id = 3
dvt mode = 0
dvt vsan = 3
tgt pwwn = 22:00:00:20:37:88:20:ef
tgt lun = 0x0
tgt vsan = 1
Related Commands
slot
Specifies the module number. The range is from 1 to 9.
brief
Displays SANTap DVTLUN configuration in a brief format.
dvt-pwwn
Displays the DVT port world wide name (PWWN).
Release
Modification
NX-OS 4.1(1b)
This command was introduced.
Command
Description
show santap vttbl
Displays the SANTap VTTBL configuration.
