Cisco CTS-TX9000, Assembly, Use & Care, And Field-Replaceable Unit Manual

Page: 36 / 470

2-10
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
OL-27038-01
Chapter 2 Room Requirements for the TX9000 and TX9200 Systems
Network Port Requirements For the TX9000 and TX9200
Figure 2-4 Option 2: 2’ x 2’ (0.61 m x 0.61 m) Recessed Indirect Lighting Fixtures
Network Port Requirements For the TX9000 and TX9200
The TX9000 and TX9200 require a single Gigabit Ethernet port (RJ-45 UTP) installed on the wall
behind the system. This port connects the CTS primary codec (TS1), which is the main interface between
the CTS endpoint and the network, to the network infrastructure.
The CTS primary codec and participant convenience port connectivity options are listed in Table 2-10 .
Table 2-9 Callouts for Figure 2-4
Callout Description
1
Ceiling-installed
2’ x 2’ (0.61 m x 0.61 m) recessed indirect lighting
fixtures
1
343554
Table 2-10 TX9000 Network Access Requirements
Options # of Ports Connection Notes
CTS Codec (Required) 1 Wired RJ-45 UTP Gigabit Ethernet on wall
behind the system.
Option 1 for Participant Convenience Ports 1 Wireless Customer provides wireless access.