manualshive.com logo in svg

Cisco 8851, Administration Manual

The Cisco 8851 is a cutting-edge communication device offering advanced features and exceptional audio quality. Make the most of its capabilities by downloading the Quick Reference Manual, which provides easy-to-follow instructions. Access the comprehensive manual for free at manualshive.com, enhancing your experience with this top-tier Cisco product.

Share
Download
background image

Port ID TLV

For the outgoing LLDPDU, the TLV supports subtype=3 (MAC address). The 6 octet MAC address for the
Ethernet port is used for the value of Port ID.

For the incoming LLDPDU, the Port ID TLV is treated as an opaque value to form the MSAP identifier. The
value is not validated against its subtype.

The Port ID TLV is mandatory as the second TLV. Only one Port ID TLV is allowed for the outgoing and
incoming LLDPDUs.

Time to Live TLV

For the outgoing LLDPDU, the Time to Live TTL value is 180 seconds. This differs from the 120-second
value that the standard recommends. For the shutdown LLDPDU, the TTL value is always 0.

The Time to Live TLV is mandatory as the third TLV. Only one Time to Live TLV is allowed for the outgoing
and incoming LLDPDUs.

End of LLDPDU TLV

The value is 2-octet, all zero. This TLV is mandatory and only one is allowed for the outgoing and incoming
LLDPDUs.

Port Description TLV

For the outgoing LLDPDU, in the Port Description TLV, the value for the port description is the same as

“

Port ID TLV

”

for CDP. The incoming LLDPDU, the Port Description TLV, is ignored and not validated.

Only one Port Description TLV is allowed for outgoing and incoming LLDPDUs.

System Name TLV

For the Cisco IP Phone, the value is SEP+MAC address.

Example:

SEPAC44F211B1D0

The incoming LLDPDU, the System Name TLV, is ignored and not validated. Only one System Name TLV
is allowed for the outgoing and incoming LLDPDUs.

System Capabilities TLV

For the outgoing LLDPDU, in the System Capabilities TLV, the bit values for the 2 octet system capabilities
fields should be set for Bit 2 (Bridge) and Bit 5 (Phone) for a phone with a PC port. If the phone does not
have a PC port, only Bit 5 should be set. The same system capability value should be set for the enabled
capability field.

For the incoming LLDPDU, the System Capabilities TLV is ignored. The TLV is not validated semantically
against the MED device type.

The System Capabilities TLV is mandatory for outgoing LLDPDUs. Only one System Capabilities TLV is
allowed.

   Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide

48

VLAN Settings

Summary of Contents for 8851























































































































































































































































































































Reviews:

No comments

Related manuals for 8851

NEC ITK-6DGS-1 Quick Start Manual preview
ITK-6DGS-1
Brand: NEC Pages: 19
NEC Univerge DT820 Quick User Manual preview
Univerge DT820
Brand: NEC Pages: 2
NEC Univerge DT820 Reference Sheet preview
Univerge DT820
Brand: NEC Pages: 4
NEC DT710 Quick User Manual preview
DT710
Brand: NEC Pages: 2
Warner Telecom Group UX5000 Quick Reference Manual preview
UX5000
Brand: Warner Telecom Group Pages: 6
HTC 2PS6400 Safety Manual preview
2PS6400
Brand: HTC Pages: 12
Alcatel 1011A Quick Start Manual preview
1011A
Brand: Alcatel Pages: 2
Dash OnePlus 3 Quick Start Manual preview
OnePlus 3
Brand: Dash Pages: 24
C.R. Laurence C9ASA Installation Instructions preview
C9ASA
Brand: C.R. Laurence Pages: 2
DOPOD C720W User Manual preview
C720W
Brand: DOPOD Pages: 352
ZTC ZT658 User Manual preview
ZT658
Brand: ZTC Pages: 168
Sony Ericsson Z320 Working Instruction, Mechanical preview
Z320
Brand: Sony Ericsson Pages: 54
Auerswald COMfortel D-400 Quick Manual preview
COMfortel D-400
Brand: Auerswald Pages: 16
Grandstream Networks GXP3000 User Manual preview
GXP3000
Brand: Grandstream Networks Pages: 56
Viking K-1900-8-IP Product Manual preview
K-1900-8-IP
Brand: Viking Pages: 25
Icemobile BLIZZARD III User Manual preview
BLIZZARD III
Brand: Icemobile Pages: 11
Samsung SPH A460 User Manual preview
SPH A460
Brand: Samsung Pages: 129
Samsung Smiley SGH-t359 Manual Del Usuario preview
Smiley SGH-t359
Brand: Samsung Pages: 155

Brands by name

Popular brands

Load more brands