Circontrol Raption 50 Series, User Manual

Page: 125 / 168

121
Value Description
Stop transaction
when EV
unplugged
YES:
Charge Transaction stops when the cable is disconnected
from the EV
NO:
Charge Transaction does not stop when the cable is
disconnected from the EV; furthermore, if it is reconnected
energy transfer is allowed again. It is required for the user to
present the identifier in order to stop the Charge Transaction.
Unlock CP
side when EV
unplugged
YES:
Charge Point unlocks the connector when the cable is
disconnected from the EV
NO:
Charge Point keeps the connector locked when the cable is
disconnected from the EV, it is required for the user to present
the identifier in order to unlock the connector
Supported profiles List of supported profiles on the Charge Point
*NOTE:
this field is for information purposes, it cannot be modified.
Maximum number
of configuration
Keys Maximum number of requested configuration keys that can be
requested by the Central System.
*NOTE:
this field is for information purposes, it cannot be modified.
Heartbeat interval Number of seconds between Heartbeats.
*NOTE:
setting this value to 0 disables the Heartbeat.
WebSocket ping
interval Number of seconds between Pings.
*NOTE:
setting this value to 0 disables the Websocket Ping/Pong.
Metervalue (select
one or more) List of supported values used in the MeterValue.
*NOTE:
hold 'Ctrl' key in order to select more than one Measurand.
Transaction
message attempts How many times the Charge Point should try to send a request to
the Central System.