Circontrol Raption 50 Series, User Manual

Page: 66 / 168

62
Raption 50 Series User Manual
H)
Charge Point Configuration
The Charge Point is capable of balancing the available power based on the number of
outlets in use.
Value Description
Enable Power
Balance
YES:
the Charge Point shares equally the power delivered to
each ongoing Charge Transaction without exceeding the limit
configured.
NO:
the Charge Point does not take in consideration any limit,
giving the maximum power for each connector.
Total Consumption Maximum current value offered by the Charge Point that
shares between the ongoing Charge Transactions.
*NOTE:
This value must be equal or higher than 6A multiplied
by the number of outlets. Meaning that it must be equal or
higher than the sum of current delivered when all outlets are
charging at the minimum.
This section applies ONLY when the Raption is working as a Master,
as a part of our Master-Slave solution. Please, if that is not the case,
skip this section.