![background image](http://html.mh-extra.com/html/circontrol/raption-50-series/raption-50-series_user-manual_2607965111.webp)
107
Value
Description
Stop charge if
StartTransaction replies
ConcurrentTx
YES:
Stop existing charge transaction after response from
backend (StartTransaction.conf) when user has already
involved in another transaction.
NO:
Charge transaction does not stops even if backend
rejects the user. (StartTransaction.conf)
*NOTE
:
Set this option according to your backend system.
Require auth. At remote
Start
YES:
Charge point sends an authorization request before
starting a new remote charge transaction request.
NO:
Charge point starts a new remote charge transaction
without authorization request.
Active Power in
MeterValues
YES:
Send power (Power.Active.Import) and energy
(Energy.Active.Import.Register) consumed by the vehicle
within meter values requests.
NO:
Only energy consumed is sent within meter values
request.
Heartbeat interval
Heartbeat send interval (in seconds) for the back-end
system.
Connection timeout
Timeout (in seconds) before connecting to the central sys-
tem.
Meter value sample
interval
Meter value sample send interval (in seconds) during
charge transaction.
*NOTE
:
Meter values are disabled if 0 seconds is set
Summary of Contents for Raption 50 Series
