Cateye Padrone Smart CC-PA500B Online Manual Download

Page: 1 / 145

* Instructions differ depending on the devices you have.

For troubleshooting related to the smart computers or to Cateye Cycling™, see "

Frequently

Asked Questions

* For explanatory purposes, in this manual red text/icons on the smart computer screen

represent flashing items.

* The display screens and illustrations used in this manual are provided for instructional

purposes only. Actual screens and illustrations may differ depending on devices used.

* The online manual and YouTube videos for this product are subject to change without

notice.

Usage Instructions

Select the devices you have.

Summary of Contents for Padrone Smart CC-PA500B


















































































































































Search results

Summary of Contents for Padrone Smart CC-PA500B

Reviews:

Related manuals for Padrone Smart CC-PA500B

Brands by name

Popular brands

Cateye Padrone Smart CC-PA500B, Online Manual

Search results

Summary of Contents for Padrone Smart CC-PA500B

Reviews:

Related manuals for Padrone Smart CC-PA500B

Brands by name

Popular brands