manualshive.com logo in svg

Cateye Padrone Smart CC-PA500B, Online Manual, Page: 130 / 145

Share
Download
Cateye Padrone Smart CC-PA500B Online Manual Download Page 130

• Pairing (sensor ID synchronization) must be performed in order to use smart computer and

sensors.

• Do not pair sensors at a race venue or in similar locations where there are a lot of other

users. Doing so may cause smart computer to be paired with another device.

Important

1. From 

 (MENU) at the top left of the screen, turn on [Connect], and

then tap [Device].

Smartphone

Pairing

Tap [Device Pairing] to start pairing.

For instructions on using devices, refer to the following:

Pairing with smart computer

Smart computer

Smartphone

1. On the measurement screen, press MODE for 1 second to display the

smartphone search screen.

When Cateye Cycling™ detects smart computer, a message is displayed on the

smartphone.

Tap [Pair] to complete pairing.

After pairing is completed, from 

 (MENU) at the top left of the screen, tap [Trip] to

Smartphone search

screen

switch to the Trip screen.

Summary of Contents for Padrone Smart CC-PA500B


















































































































































Reviews:

No comments