Cateye Padrone Smart CC-PA500B Online Manual Download Page 118

Page: 118 / 145

Frequently Asked Questions

Abnormal display : Heart rate

Why are heart rate readings still displayed even after I take off the sensor?

When using a sensor made by another company, heart rate may continue to be displayed

for a long time after the sensor has been removed.

Heart rate display is unstable. What should I do?

The heart rate sensor may not be attached correctly.

• Refer to the heart rate sensor instruction manual and attach the heart rate sensor in the

correct position.

Wearing the heart rate sensor

• Ensure that the heart rate sensor is attached so that

TOP

is facing up.

• Try moving the electrode from the left to the right so that it sits over your heart. This may

improve heart rate display in some cases.

Summary of Contents for Padrone Smart CC-PA500B


















































































































































Search results

Summary of Contents for Padrone Smart CC-PA500B

Reviews:

Cateye Padrone Smart CC-PA500B, Online Manual, Page: 118 / 145

Search results

Summary of Contents for Padrone Smart CC-PA500B

Reviews: