Chicco FULLY, Instructions For Use Manual

Page: 23 / 136

23
sitting position/stroller/car seat position. The adaptors
are fastened to the central joints and can be positioned
either parent facing (Fig.47A) or street facing (Fig.47B).
WARNING: During installation, always make sure that the
black buttons of the adaptors face outwards.
The Fully stroller can also be used with a second child in
double configuration, with the use of the second seat and
specific adaptors, which can be purchased separately.
WARNING: All the possible modes of use with the use of
the components present in this configuration of the stroller
you have purchased are shown in figures 47C - 47D.
CAR SEAT ADAPTOR
48. A Chicco Keyfit car seat can be installed on the Fully
stroller, using the specific “Car seat adaptor” (sold sep-
arately). The KeyFit adaptor for the Fully stroller can be
installed directly on the frame (Fig. 48) or, alternatively,
on “adaptors 1” (Fig. 48A). To properly assemble the “Car
seat adaptor’’, refer to the relative instruction manual.
WARRANTY
The product is guaranteed against any conformity defect in
normal conditions of use as provided for by the instructions.
The warranty shall not therefore apply in the case of dam-
age caused by improper use, wear or accidental events. For
the duration of the warranty on conformity defects please
refer to the specific provisions of applicable national laws in
the country of purchase, where appropriate.