Check Point IP690 - Flash Based Sys, Installation Manual

Page: 65 / 118

Installing and Replacing ADP Modules
Check Point IP690 Security Platform Installation Guide 65
The following figure shows the IP690 ADP module front panel details.
To install or remove transceivers in a Check Point ADP module
For ADP modules that require transceivers, refer to the following figure, which shows how to
install or remove the transceivers. Transceivers are hot swappable as are the interface cables you
use with them. Rotate the latch levers up or down to secure transceivers, or to release them for
removal. You do not need to change the interface type in Network Voyager or the CLI, as the
system makes the configuration changes automatically.
To identify whether a fiber transceiver you are using is short-range or long-range, refer to the
color of the latch lever as follows:
„
To install an ADP transceiver:
Type Latch lever color
Short-range Beige
Long range Blue
1000BaseX
1
2
3
4
00605a
1000BaseX
5
6
7
8
1000BaseT
1 2 3 4 5 6 7 8
1000BaseT
1
2
3
4 5
6
7
8
00660
ADP module with ports for transceivers
ADP module with fixed RJ-45 ports
Link and Activity LEDs
00652
1
2
3
4 1
2
3
4
Latch lever
Flip latch lever down before inserting
the ADP transceiver