Check Point IP690 - Flash Based Sys, Installation Manual, Page: 62 / 118

6
Installing, Using, and Replacing ADP Services Modules
62 Check Point IP690 Security Platform Installation Guide
10. If a FIPS screen is installed, note the position of the screen, as it must be reinstalled the same
way. Remove the two screws that secure the screen, and remove the screen.
11. Insert the ADP module.
Note
Remove any SFP transceivers that are installed in the ADP module first to make the
procedure easier.
a. Angling the ADP module at a 45-degree angle to ensure that the rubber EMI gaskets seat
properly and don’t roll back, insert the module bezel into the front panel. As you lower
SL
OT
1
SL
OT
2
00649
Remove the two FIPS screen
screws and the screen