Check Point IP690 - Flash Based Sys, Installation Manual

Page: 44 / 118

4
Installing and Replacing Network Interface Cards
44 Check Point IP690 Security Platform Installation Guide
6. From underneath the chassis tray assembly, remove the bezel or NIC retaining screws.
If you are installing a NIC in an unoccupied slot, remove the blank bezel that occupies the
space in the appliance front panel and retain it for future use.
If you are removing an installed NIC, remove it by pulling up on the back of the NIC
adjacent to the two interface connectors.
7. Insert the new NIC.
a. Insert the NIC bezel into the front panel.
SL
OT
1
SL
OT
2
00590
RESET
AUX
CONSOLE
SL
OT
1
SL
OT
2
00592
RESET
AUX
CON
SOL
E