Check Point IP690 - Flash Based Sys, Installation Manual

Page: 27 / 118

Check Point IP690 Security Platform Installation Guide 27
2
Installing the Check Point IP690
Appliance
This chapter describes how to install the IP690 appliance. The following topic is discussed:
„
Before You Begin
„
Rack-Mounting the Appliance
Before You Begin
To rack-mount the appliance, you need:
„
Phillips-head screwdriver
„
Grounding wrist strap
„
Suitable, grounded work surface on which to place the chassis tray assembly
Caution
To help guard against electrostatic discharge damage, make sure you are properly
grounded by using a grounding wrist strap and following the instructions provided with
the wrist strap before you handle the components or open the appliance.
Rack-Mounting the Appliance
The Check Point IP690 security platform mounts in a standard 19-inch equipment rack with four
mounting screws, as
Figure 8 shows.
Note
To avoid damaging your equipment, Check Point recommends that you use all four rack-
mounting bolts when you install your appliance on the rack.