Check Point IP690 - Flash Based Sys, Installation Manual

Page: 31 / 118

Rack-Mounting the Appliance
Check Point IP690 Security Platform Installation Guide 31
5. Adjust the mounting brackets on the side of the appliance if necessary.
6. Mount the appliance into a standard 19-inch rack by using the mounting screws located on
the mounting brackets. You can use the rear brackets for additional chassis support.
7. Slowly slide the chassis tray assembly back into the appliance, taking care to prevent
damaging components, and resecure the two chassis tray assembly retaining screws.
8. Reinstall the fan unit into the rear of the appliance.
9. Reinstall the power supplies.
After you rack-mount the appliance, you can ground it by using the grounding lugs provided.
SL
OT 1
SL OT
2
SL OT
3
SL
OT 4
1
2 3
4
IP6
90
RES ET
AUX
CON SOL
E
00583