Check Point IP690 - Flash Based Sys, Installation Manual

Page: 60 / 118

6
Installing, Using, and Replacing ADP Services Modules
60 Check Point IP690 Security Platform Installation Guide
8. From underneath the chassis tray assembly, remove the four bezel retaining screws.
If the slots you are using for the ADP module are unoccupied, remove the filler panels that
occupy the spaces in the appliance front panel and retain them for future use.
If the slots you are using for the ADP module are occupied, remove the NICs or ADP
modules that occupy the spaces in the appliance front panel and retain them for future use.
Note
Remove any SFP transceivers that are installed in an ADP module first to make the
procedure easier.
9. Remove the two screws that secure the left air baffle and remove the baffle. Retain the baffle
for future use. Reinstall the two baffle screws to secure the motherboard.
SL
OT 1
SL
OT
2
00440a
Remove the four bezel screws, and filler panels,
installed PMC NICs, or ADP modules