Carrier Access Access Navigator, User Manual

Page: 611 / 704

Access Navigator - Release 1.8 August 2003 18-155
CLI Language Reference
CLI Command List
Show Users
Purpose:
Shows current user settings and status.
NOTE:
Normally a user logs in once to start a management session, then
logs off when done (
exit
command). The system allows the same user name
to be “logged in” more than once. The total number of simultaneous sessions
by all users can not exceed 3, comprising a maximum of 1 RS-232 session and
2 Telnet sessions.
Security:
Level 3 (monitor)
Syntax:
show users
The following is a typical message showing four users. Alice and Bill have level 1
(manager) access. Carl Smith has level 2 (operator) access. And Dave46 has level 3
(monitor) access. The message also gives the current login status and the time and date
that each user last logged into the system.
Message:
User Level Logged in Last Login
---- ----- --------- ----------
alice 1 1 09:28:37 11/23/1998
bill 1 2 14:06:25 11/17/1998
carlsmith 2 0 11:17:45 11/22/1998
dave46 3 0 12:14:33 11/20/1998
Description:
Item Description
User User names of people with access to the system.
Level User access level: manager (1), operator (2), monitor (3).
Logged in Number of active management sessions, 0 to 3.
Last Login Time and date that user last logged into the system.