Carrier Access Access Navigator, User Manual

Page: 348 / 704

15-6 August 2003 Access Navigator - Release 1.8
Diagnostics & Troubleshooting
Configuration Change Log
Syntax:
log ds1 < n >
Displays only DS1 alarms.
Syntax:
log ds1 < n > < major | minor | alert | info >
Displays only DS1 alarms with a specified severity level.
Syntax:
log equipment
Displays only equipment alarms.
Syntax:
log equipment < major | minor | alert | info >
Displays only equipment alarms with a specified severity level.
Syntax:
log info
Displays only informational events.
Syntax:
clear log
Erases all data in the log file.
Configuration Change Log
The Access Navigator maintains a log of the most recent 500 configuration changes in a separate log
file, which can be displayed using the CLI
log config
command (see Log Config on page 18-41 ).
Filtering options allow the user to display selected events. The Access Navigator also records the
Management Interface causing the change – CLI, EOC, SNMP, or ICC (inter-controller commands).
Syntax:
log config
Displays all configuration log events.
Syntax:
log config ds0 < n : ch >
Displays only the configuration management events affecting a DS0 channel or range
of channels.
Syntax:
log config ds1 < n >
Displays only the configuration management events affecting a DS1 or range of DS1s.
Syntax:
log config crv < value >
Displays only the configuration management events affecting a CRV or range of
CRVs.
Syntax:
log config source < cli | eoc | snmp | icc >
Displays only the configuration management events from a management interface.
Syntax:
clear config log
Erases all data in the configuration change log file.