Carrier Access Access Navigator, User Manual

Page: 472 / 704

18-16 August 2003 Access Navigator - Release 1.8
CLI Language Reference
Managing Users
Description:
Add User
User names can be up to 10 characters long, and may use any combination of letters and numbers.
No spaces or special characters are allowed. Names are not case sensitive. Upper case (capital
letters) will be converted to lower case letters before being processed. The name must be enclosed
in quotes if it contains spaces..
Add a new user with the following command.
Syntax:
add user <"name">
Example:
add user "alice"
Set User Access Level
NOTE:
There must be at least one Level 1 user.
All users have Level 1 access (highest) unless changed to a lower access level.
Set user access levels with the following command.
Syntax:
set user <"name"> level < access >
Example:
set user "alice" level 2
Item Description
User User names of people with access to the system.
Level User access level: manager (1), operator (2), monitor (3).
Logged in Number of active management sessions, 0 to 3.
Last Login Time and date that user last logged into the system.
User Level Access
Manager 1 Access to all commands. Can add and delete users.
There must be at least one Level 1 user.
Operator 2 Access to all commands except adding and deleting
users. Can change own password.
Monitor 3 Access limited to displaying reports and status. No
access to any commands that could affect system
operation.