Carrier Access Access Navigator, User Manual

Page: 633 / 704

Access Navigator - Release 1.8 August 2003 18-177
CLI Language Reference
CLI Command List
Syntax:
upload tftp config <ipaddr> <"file"> <blocksize>
Example:
upload tftp config 192.168.118.65 "C:AN26"
WhoAmI
Purpose:
Shows the name and access level of the user who is logged into the Access Navigator
from the current management terminal. It produces a message similar to that shown
below.
Security:
Level 3 (monitor)
Syntax:
whoami
Message:
Logged in as user 'alice' (level 1)
Field Description
tftp Upload software via Internet TFTP.
Trivial File Transfer Protocol (TFTP) allows a file to be sent
over a network by specifying the server IP address. The
configuration file must be written to a TFTP file server
accessible by both the Telnet management terminal and the
Access Navigator. Using an RS-232 or Telnet management
session, the operator sends an
upload config
command to
the Access Navigator, specifying the location of the TFTP server
and the destination configuration file name to use. TFTP server
capabilities, including time-out settings, must match the
bandwidth of the network being used.
config Configuration database.
ipaddr IP address where configuration file is to be stored. (This is the IP
address of the TFTP server.) IP address has format
xxx.xxx.xxx.xxx , where xxx is a number from 0 to 255.
file File name used to save the configuration data. The file and
optional path must be enclosed in quotes, as in
"C:\CONFIG\AN26". The default path is the root directory of the
TFTP server.
blocksize Transmission block size (optional), 512 to 8192. The default is
8192 bytes.