Carrier Access Access Navigator, User Manual

Page: 513 / 704

Access Navigator - Release 1.8 August 2003 18-57
CLI Language Reference
CLI Command List
Reset All
CAUTION!
T
HE
“
RESET ALL
”
COMMAND WILL INTERRUPT SERVICE FOR ABOUT
30
SECONDS
. DCS
CROSSCONNECTS WILL BE RESTORED
. GR-303
CROSSCONNECTS WILL
BE LOST
.
Purpose:
Produces a soft reset of both Controller cards. It is equivalent to a hard reset, in which
the Access Navigator is powered off and on again. The entire process takes about 30
seconds.
Security:
Level 2 (operator)
Syntax:
reset all
The
reset all
command has the following effects:
l
Resets both Controller cards.
l
Erases all RAM data, including the GR-303 crossconnects, status, event log,
time, and date.
l
Does not affect provisioning and other settings stored in flash memory.
l
Upon restart, provisioning and other settings are restored.
l
Upon restart, the clock starts at time 00:00:00 and date 01/01/1998.
l
Upon restart, the status interval timer starts at zero seconds.
Reset DS1 Framer
CAUTION!
T
HE
“
RESET
DS1”
COMMAND WILL MOMENTARILY DISRUPT SERVICE
WHILE THE
DS1
FRAMER RESYNCHRONIZES
.
Purpose:
Enables the operator to reset one or more DS1 framers. The command resets the DS1
receiver and may be used to test Loss of Frame recovery.
Security:
Level 2 (operator)
Syntax:
reset ds1 <n>
Example:
reset ds1 9
Example:
reset ds1 5-8
Field Description
n DS1 number, 1 to 32, or a range of numbers such as 2-8.