Carrier Access Access Navigator, User Manual

Page: 490 / 704

18-34 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Disconnect Remote
Purpose:
Removes the DS0 connections established by the
connect remote
command.
Security:
Level 2 (operator)
Syntax:
disconnect remote <" name ">
Example:
disconnect remote "AcmeV35"
Exit
Purpose:
Ends management session and logs out the user. When finished with a management
session, it is important to log out from the Access Navigator by typing the
exit
command. Logging out will maintain network security, ensuring that the next user must
log in with a valid user name and password.
Security:
Level 3 (monitor)
Syntax:
exit
Exit Remote Session (Ctrl+C)
Purpose:
To end a remote CLI management session to an Adit 600 terminal, press the
Ctrl+C
keys to cancel the connection to the remote Adit 600 terminal. The Access Navigator
prompt will then appear. To start a remote session, see
Logon Remote on page 18-44 .
NOTE:
To enter the
Ctrl+C
command, hold down the Control (Ctrl) key on
the keyboard and press the C key. Some terminal programs must be configured
to pass through control codes, rather than intercepting the control codes as
commands to the terminal program.
Field Description
name The user defined name for the fractional interface. The name
must be enclosed in quotes.