Carrier Access Access Navigator, User Manual

Page: 187 / 704

Access Navigator - Release 1.8 August 2003 8-5
Provision Access Navigator
Set System ID or CLLI Code
Set System ID or CLLI Code
NOTE:
The System Identifier (name, location, or Telcordia CLLI code) is a text string,
such as “Acme Corp AN#2” or “DNVRCO1A201”. The identifier can be up to 20 characters
long, and may use any combination of letters and numbers. The identifier must be
enclosed in quote marks.
NOTE:
The System Identifier also appears in the command line prompt. The default
System Identifier is “Access Navigator” so the command prompt will be “Access
Navigator>”. When you change the identifier, the prompt will also change. (If other
management sessions are in progress, the operators will not see the new prompt until they
start a new session.)
1. Show current System Identifier with the following command:
show id
2. If System Identifier is correct, skip remaining steps.
3. Set System Identifier with the following command:
set id <"id">
Example: set id "DNVRCO1A201"