Carrier Access Access Navigator, User Manual

Page: 463 / 704

Access Navigator - Release 1.8 August 2003 18-7
CLI Language Reference
Text Conventions
l
Errors in a command will produce an error message. The CLI will also mark the location of the
first error found in the command with the
^
symbol, as in the following example.
SystemID> set ds1 42 framing esf
*-----------------^
*-Number out of range: must be 1..32
SystemID>
Text Conventions
Procedures in this manual use the following conventions to represent input commands and output
messages.
NOTE:
Online help does not display characters in bold or italic.
l
Input commands appear in a bold typewriter font, as in the following example.
set ds1 1-4 up
l
If a command requires the operator to enter information, an italic typewriter font is used to show
what item or items are required. Each item will be enclosed in < and > symbols, as in the
following example. Do not type the < > symbols.
set ds1 < n> <setting>
l
If the operator must enter one item from a list, the items will be separated by vertical lines, as in
the following example. Do not type the < | > symbols.
set ds1 < n> <up|down>
l
System output messages to the operator are printed in normal typewriter font, as in the following
response to show the settings for DS1 number 13.
show ds1 13
Settings for DS1 13:
Circuit ID: AcmeCorp
Up/Down: UP
Framing: ESF
Line Coding: B8ZS