Carrier Access Access Navigator, User Manual

Page: 576 / 704

18-120 August 2003 Access Navigator - Release 1.8
CLI Language Reference
CLI Command List
Syntax:
set remote config <n> < on | off >
Example:
set remote config 9 on
Set Remote ID
Purpose:
Creates an identifier in the Access Navigator for the remote terminal connected to an
Access Navigator drop DS1.
NOTE:
Use the
show remote
command to display the current setting.
Security:
Level 2 (operator)
Syntax:
set remote < n > id <" name ">
Example:
set remote 9 id "AcmeCorp"
Set Remote RS232 Baud
Purpose:
Sets Access Bank II remote RS-232 interface baud rate.
The Access Bank II provides an RS-232 DTE customer interface port for connection to
one DS0 channel. This port supports baud rates from 1,200 to 57,600 between two
Access Bank II’s and uses a special format to transport asynchronous data over the
synchronous DS0 channel.
Security:
Level 2 (operator)
Field Description
n DS1 number, 1 to 32.
on Enable automatic provisioning.
off Disable automatic provisioning.
Field Description
n DS1 number, 1 to 32.
name A user defined name describing the interface. The name is a text
string up to 32 characters long, and may use any combination of
letters and numbers. No spaces or special characters are allowed.
The name must be enclosed in quote marks.