Canopus HDMA-4000, User Manual

Page: 82 / 138

Reference 3
82
Command descriptions (HDMA-4000 Ver.1.X mode) Command descriptions (HDMA-4000 Ver.1.X mode)
Supported commands Supported commands
(adrs)PL Starts playback from the current position.
With an address specified, stops at the specified position.
ST Pauses with the video displayed.
adrs SE Pauses with the specified address displayed.
adrs SL Starts playback from a specified address.
CH Uses the chapter for address mode.
TI Uses the title for address mode.
arg AD Audio settings (Supports mute only).
?A Returns current positions.
Style: TTCCMMMMSS
TT Title number (2 digits), CC Chapter number (2 digits), MMMM,SS
Time.(Not supported. Always returns 0.)
?R Returns the title number at the current position.
Style: TT Title number (2 digits).
?C Returns the chapter number at the current position.
Style: CC Title number (2 digits).
arg MS Specifies repeat mode.
0MS Does not repeat. (Stops at the last title.)
8MS Repeats the chapter.
16MS Repeats the title.
24MS Repeats all the titles.
?P Returns the current operation mode of the player.
Style: PMM (MM Operation mode).
P04 Playing video.
P05 Paused.
P06 Stopped.
?S Returns the repeat mode settings.
SO Stops playback. (With a blank screen.)
arg VO
arg VL
arg VR argVO Specifies the volume.
argVL VO=Same volume on the left and right, VL=Left,
VR=Right.
argVR 0-50.
arg PO Control modes.
0PO Switches to the scheduled playback mode. (Default)
1PO Switches to serial control mode.