107
Reference 4
Setup using W
eb browser
Local settings
Local settings
The local settings stored in the HDMA-4000 system can be changed on the Local
settings screen. User name and the password are required to change settings.
User name
Enter your user name. The default user name is [admin].
Password
Enter your password. No password is set in the default
setting.
- System
LCD
Specifies the information displayed on the LCD during
operation.
Remote Control
ID
Specifies the remote control ID to which the HDMA-4000
responds. Choose [Disable] to disable the remote control.
For information on how to specify the ID of the remote
control, see the Appendix to this manual.
Front panel
operation
Enables/Disables operations from the front panel.
Remote control
operation
Enables/Disables operations (or power off only) from the
remote controller. When "power off" is disabled, shutdown
with the [POWER] button on the remote controller will be
unavailable.
Automated unit
detection
Specify whether or not the HDCS-7000 automatically
detects other units on the network. When this is [Enabled],
network traffic will increase because packets are regularly
transmitted over the network.
Automated detection is performed by SSDP.
Summary of Contents for HDMA-4000
