Canopus HDMA-4000, User Manual

Page: 109 / 138

109
Reference 4
Setup using W
eb browser
- Network
IP address
settings Specifies the method for acquiring an IP address and makes
other detailed settings. When [Use the following IP address]
is checked, [IP address], [Subnet mask], and [Default
gateway] become available to specify.
DNS server Specifies the method for acquiring a DNS server and makes
other detailed settings. If [Use the following IP address] is
selected in [IP address], [Use the following DNS server
address] is automatically selected.
Host name Specifies the host name.
Telnet Enables/Disables the Telnet function.
SSH Enables/Disables SSH.
Samba share Specifies the sharing status of the internal HDD of the
HDMA-4000. Choose [Read only] or [Read write] to view the
[Schedule contents] or [Serial control contents] directly.
- Schedule
Contents drive Specifies the drive where the default contents of the
scheduled playback are stored. Options are: the internal
drive, connected USB drive or network drive A-D.
Schedule file Specifies the name of the schedule file. “Schedule.txt” is set
at the time of factory shipping.
Initial channel Specifies the default channel name. If not specified, the first
channel defined in the schedule will be used.
- Serial control
Contents drive Specifies the default content drive for serial control.
Seamless Enables/Disables seamless playback in serial control
mode.
Baud rate Specifies the communication speed of the serial port.
Data bits Specifies the data bit length.
Parity Specifies the parity (technique for detecting data errors).
Stop bits Specifies the stop bit length.
Flow control Specifies the communication speed of the serial port.