Canopus HDMA-4000, User Manual

Page: 75 / 138

75
Reference 3
Serial control
Unique extended commands Unique extended commands
SO Stops playback (With a blank screen).
arg VO
arg VL
arg VR argVO Specifies volume.
argVL VO=Equal volume on the left and right, VL=Left,
VR=Right.
argVR 0-50.
arg PO Controls mode.
0PO Switches to play list mode.
1PO Switches to DVD mode.
(arg)POFF Turns the power off (99POFF will reboot the unit.)
CR Changes the content root folder.
Specify the relative path from the serial control content folder with
enclosing quotation marks.
The operation mode will be initialized.
arg CD Changes the drive to search for contents.
0 Internal HDD.
1 USB drive.
2 - 5 Network drives A - D.
?O Returns the volume settings.
Style: LLRR LL Left volume, RR Right volume.
?L Number of contents.
?U Number of sync lists. (Available to communicate/Total number.)
* For units other than the HDMA-4000Sync, this will always be
(0/0).
arg RX Advanced settings. (Write the sum of the setting values.)
1 Uses a blank screen when stopped.
2 Does not display the top of the file in SE.
4 Does not clear repeat mode in CL.
$X Loads advanced settings.
?I Returns the IP address.
Returns R when the IP address is not specified.
* Only PO and POFF are available in scheduled playback mode.
N o
t e
When multiple commands are written on one line, if the next command is
sent before a response is returned, the next command will be executed,
ignoring commands that have not yet been executed. In this case, sending a
<CR> will abort the execution of multiple commands.