Canopus HDMA-4000, User Manual

Page: 105 / 138

105
Reference 4
Setup using W
eb browser
- Serial control
Contents drive Displays the default content drive for serial control.
Seamless Displays the setting status of seamless playback.
Baud rate Displays the communication speed of the serial port.
Data bits Displays the data bit length of the serial port.
Parity Displays the parity setting of the serial port.
Stop bits Displays the stop bit length of the serial port.
Flow control Displays the status of flow control
Network serial
control Displays the status of network serial control.
Serial controls
operation mode Displays the current serial controls operation mode.
Playback delay
from the start
command (PL) Displays the delay before the HDMA-4000 starts playback
after a PL command has been issued.
- Playback mode setting
Cue up Displays the setting status of the stopping position when a
file is stopped with a command, including the SE and SL
commands.
Genlock Displays the setting status of the external sync signal.
* Displays only on the HDMA-4000Sync.
Synchronization
mode Displays the current sync mode settings.
- Monitor
Display mode Displays the monitor mode.
Monitor aspect
ratio Displays the aspect ratio.
Mode for 4:3
monitor Displays the display method for the monitor at an aspect
ratio of 4:3.