Canopus HDMA-4000, User Manual

Page: 20 / 138

Chapter 2
20
HDMA-4000 Rear Panel HDMA-4000 Rear Panel
(1) AUDIO OUT (L)
(3) SPDIF
(4) VIDEO OUT
(8) USB Port
(6) DVI-D
(2) AUDIO OUT (R)
(5) S VIDEO OUT
(9) LAN
(12) COM Port
(14) RESET Switch
(15) Power terminal
(7) COMPONENT VIDEO OUT
(11) DIP Switch
(13) Theft prevention slot
(10) REMOTE terminal
(1) AUDIO OUT (L) ....................... Audio output (left).
(2) AUDIO OUT (R) ...................... Audio output (right).
(3) SPDIF ...................................... Coaxial digital audio output.
(4) VIDEO OUT ............................ Composite video signal output.
(5) S VIDEO OUT ......................... S-video signal output.
(6) DVI-D
...................................... DVI-D terminal
(7) COMPONENT VIDEO OUT .... Component video (Y/Pb/Pr) signal output.
(8) USB Port ................................. Port for connecting a USB device.
(9) LAN ......................................... Port for connecting an Ethernet cable.
(10) REMOTE terminal .................. Remote control terminal.
(11) DIP Switch .............................. Used to enable WOL (See Chapter 4).
(12) COM Port ................................ Used for serial control (See Reference 3).
(13) Theft prevention slot ............. Slot for theft prevention devices such as wire
or cable locks.
(14) RESET Switch ........................ Used in emergencies. Do not use to reset.
(15) Power terminal ....................... Connects to the accompanying AC adapter.
Never connect anything here other than the
accompanying AC adapter.