Canopus HDMA-4000, User Manual

Page: 110 / 138

Reference 4
110
Network serial
control Enables/Disables network serial control. When enabled,
specify the [standby port number]. When network serial
control is enabled, operational commands are available via
the network as well as via serial control.
Serial controls
operation mode Selects the command mode of the serial controls. To enable
sync playback, select [Pioneer LD/DVD].
Playback delay
from the start
command (PL) Specifies the delay before the HDMA-4000 starts playback
after a PL command has been issued.
- Playback mode setting
Cue up Specifies the stopping position when a file is stopped with a
command including the SE and SL commands.
Genlock Enables/Disables playback timing in sync with an external
signal.
* Displays only on the HDMA-4000Sync.
Synchronization
mode Specifies the sync mode. To operate multiple HDMA-4000
units in sync, set one unit to [Sync master] and the others
to [Sync slave].
- Monitor
Display mode Specifies the output mode to the TV monitor.
Monitor aspect
ratio Specifies the monitor aspect ratio according to the monitor
to be used.
Mode for 4:3
monitor Specifies the display style on a 4:3 monitor.