Chapter 4
48
Startup and shutdown
Startup and shutdown
Startup
Startup
Here is how to start up HDMA-4000.
1
Press the
POWER button on the remote
controller.
* If the remote controller has been disabled, the HDMA-
4000 cannot be started remotely. In this case, start it by
pressing the RESET switch on the rear panel.
The POWER LED on the HDMA-4000 unit will
blink, “Boot System” will be displayed on the
LCD and the HDMA-4000 will start.
Boot System
2
Once the HDMA-4000 has started, the POWER
LED will be on, the main menu will be displayed
on the LCD and the content will start playing.
* The main menu displayed will differ according to the LCD
information settings.
HDMA-4000
PLAY
Tip
If your remote controller does not function, it may be disabled in the HDMA-
4000 hardware settings, or the ID of the HDMA-4000 unit and that of the
remote controller may not match.
Press the MENU Key on the front panel to access the settings menu. Check
the Remote Control ID of the unit and modify the ID of the Remote Control
to the correct setting.
* For more information on the Remote Control ID, see “Remote Control ID
setting” in the Appendix.
Summary of Contents for HDMA-4000
