Canon VB-M640V Operation Manual Download Page 63

Page: 63 / 287

ett
ing Page

• Video

ettings (P. 72)

• Upload (P. 96)

Settings for uploading video via HTTP or FTP when an

event is triggered.

• Memory Card (P. 101)

Settings for recording video to a memory card when an

event is triggered.

The settings of this item are the same as those of the

[Memory Card] menu. The settings can be made with

either of them.

• E-mail Notification (P. 102)

Settings for sending an e-mail notification to a specified

recipient when an event is triggered.

Video Record

Event

ecurity

Memory Card (P. 130)

Maintenance (P. 134)

• External Device (P. 104)

Operation settings for external device output and for

external device input triggered events.

• Audio

ettings (P. 87)

The settings of this item are the same as those of [Video

and Audio] > [Audio Settings].

• Audio Detection (P. 107)

Detected changes in audio input from the microphone

connected to the camera can trigger operations such as

video recording or e-mail notification.

• Timer (P. 110)

The timer function can generate events that can trigger

operations, such as video recording and e-mail

notifications, at regular intervals.

•

witch Day/Night (P. 112)

The camera angle can be moved to preset positions when

events cause Day Mode and Night Mode to switch.

• Linked Event (P. 113)

By linking two types of events, a single event is triggered.

R11 M

41 M741

R11 M

41 M741

R11 M

41 M741

R11 M

41 M741

• User Restrictions (P. 118)

Used for adding new authorized users that can access the

Admin Viewer, and for setting permissions for users.

• Host Restrictions (P. 119)

Separate access control from IPv4 and IPv6 addresses

can be set.

•

L/TL

(P. 121)

Certificate creation, administrative settings and encrypted

communication settings.

• 802.1X (P. 124)

Settings for 802.1X authentication and authentication

status display, and for certificate administration.

• IPsec (P. 126)

Settings for using IPsec.

Perform memory card operations or configure settings.

Check logs or settings, or perform camera maintenance.

User Page

Link to web page customized by the user.

For information on the User Page, contact a Canon Customer Service Center.

Summary of Contents for VB-M640V
































































































































































































































































































Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands

Canon VB-M640V, Operation Manual

Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands