Canon VB-M640V, Operation Manual

Page: 229 / 287

Admin T
ools
6
229
Context Menu
Right-click on the video detection setting screen to display a menu that allows you to use the following functions.
Unavailable functions will be grayed-out when you right-click.
Note
If you right-click while using auto tracking, the context menu will appear but none of the functions will be available.
[Copy detection area/line]
Copy the detection area/line of the selected detection setting to the clipboard.
[Paste detection area/line]
Paste the copied detection area/line from the clipboard to the detection setting being configured. Paste cannot be used
with camera tampering detection.
Pasting a detection line is possible only when the source and the target both set passing detection.
[Clear detection area/line]
Delete the detection area/line of the selected detection setting. The camera tampering detection area cannot be deleted.
[Copy detection criteria settings]
Copy the detection criteria of the selected detection setting to the clipboard.
[Paste detection criteria settings]
Paste the copied detection criteria from the clipboard to the detection setting being configured. Pasting is possible only if
the source and the target are the same detection type.
[Copy event settings]
Copy the event setting of the selected detection setting to the clipboard.
[Paste event settings]
Paste the copied event setting from the clipboard to the detection setting being configured.
Important
• It takes several seconds for the Intelligent Function to restart. No detection is performed while restarting.
• Settings in [Reduce effects of lighting change] may not work depending on the operating environment. Sudden changes in
brightness that persist may also have the same effect. Perform a detection test to check whether settings work correctly.