Canon VB-M640V, Operation Manual

Page: 209 / 287

Admin T
ools
6
209
• If the view restriction will be exceeded as a result of zooming toward wide-angle, the camera will first pan and tilt to a position where the
maximum wide-angle zoom will be within the viewing restriction area. Wide-angle zoom control will then be enabled within the view
restriction area.
• Reducing the view restriction may also reduce the zoom range.

Auto Flip and View Restriction Settings
Under the following conditions, when the View Restriction Setting Tool is launched or [Restore settings] is clicked, a
message appears indicating that the view restriction setting values are disabled and (warning icon) appears to
the left of the [View Restriction Settings] setting value input box.
Conditions
• [Apply the view restriction] is selected.
• [Camera] > [Camera Settings] > [Camera Control] > [Auto Flip] is set to [Enable] in the Setting Page (P. 76).
• When [Camera] > [Camera Settings] > [Installation Conditions] > [Image Flip] is set to [Disable] in the Setting
Page (P. 78): [Lower Limit], [Left Limit], or [Right Limit] has been entered for [View Restriction Settings].
• When [Camera] > [Camera Settings] > [Installation Conditions] > [Image Flip] is set to [Enable] in the Setting Page
(P. 78): [Lower Limit], [Left Limit], or [Right Limit] has been entered for [View Restriction Settings].
[Save settings] is clicked when [View Restriction Settings] is enabled.
Under the above conditions, a message also appears indicating that Auto Flip is disabled when [Save settings] is
clicked.
When you click [OK] in the message, Auto Flip is disabled and the [View Restriction Settings] are saved.
Setting view restrictions
automatically restricts
the camera operating
angle. At wide-angle, the camera operating
angle would allow capture outside
the view restrictions if the angle
remained the same. Therefore, it is
narrowed automatically.
Restricted view angle
Camera operating angle
Captured video range
Camera
Zoom
out
Captured video
Restricted view angle
Zoom
out
First, the center of the
maximum wide-angle
zoom is panned and
tilted.
After panning and
tilting, wide-angle
zoom control is
enabled within the
view restriction.