Canon VB-M640V Operation Manual Download Page 248

Page: 248 / 287

248

(1)

[Number of downloaded video files]

The number of downloaded files the video consists of is displayed.

(2)

[Playback with External Player]

Launch an external player (Windows Media Player, etc.) and the selected video is played back.

(3)

[Open Video folder]

Open the folder storing the selected video. Double click the video file in the folder to play it back.

Note

• The downloaded H.264 video file will have the “.mov” extension.

• When the data size for “.mov” files is 1 MB or greater, they are split into several files.

• If “.mov” files are split into several files, only the initial few seconds of the first file can be played back.

• The downloaded video files can be played back using QuickTime 7.7 and Windows Media Player 11/12. For the Windows Vista

operating system or earlier, use QuickTime. However, playback when using this software is not guaranteed.

Use the external player for playback.

(2)

(3)

(1)

Summary of Contents for VB-M640V
































































































































































































































































































Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands

Canon VB-M640V, Operation Manual

Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands