Canon VB-M640V Operation Manual Download Page 26

Page: 26 / 287

Step 5 Adjust Advanced Settings According to Use

Advanced settings can be made in the Setting Menu, such as for

camera control and security, suitable for the intended camera

use.



“

etting Page” (P. 59)

Step 6 Use the Viewers

Use the viewers included on the camera.

The Admin Viewer is intended for administrators, and the VB

Viewer for guest users. Use the VB viewer to check content

distributed to guest users and Admin Viewer to make all settings

and fully check all preparations.



“Admin Viewer/VB Viewer” (P. 137)

Step 7 Use Admin Tools

Admin Tools can be used to set masks to ensure privacy, set view restrictions

and set the Intelligent Function to detect changes in video.

You can also view logs of the camera’s operational status, as well as browsing

and managing video recorded to the camera’s memory card.



“Admin Tools” (P. 191)

Troubleshooting

Please refer to the “Appendix” (P. 249), in case of error messages or problems.

etting Page

Admin Viewer

Summary of Contents for VB-M640V
































































































































































































































































































Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands

Canon VB-M640V, Operation Manual

Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands