Canon VB-M640V Operation Manual Download Page 101

Page: 101 / 287

ett
ing Page

101

Settings for recording video to a memory card when an event is triggered.

[Memory Card Operations] and [Memory Card Information] on this page are common with [Memory Card] (P. 130). Settings

configured in any page will be reflected in the other pages.

Video Record Setting

Sets whether to record video from the camera to a memory card or upload it with HTTP or FTP.

These can also be set with the [Upload] submenu (P. 96) and will be reflected in [Video Record Setting] here.

[Video Record Action]

Select [Record to Memory Card] to record to a memory card.

Memory Card Operations

For details on settings, please refer to (P. 130).

Memory Card Information

For details on settings, please refer to (P. 132).

Settings for Recording Video to a Memory Card
[Video Record] > [Memory Card]

Summary of Contents for VB-M640V
































































































































































































































































































Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands

Canon VB-M640V, Operation Manual

Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands