Canon VB-M640V Operation Manual Download Page 134

Page: 134 / 287

134

Check camera information, such as the firmware version, and perform maintenance on the camera system.

Device Information

Displays information about the connected camera.

Tool

You can display camera logs and settings, initialize and backup/restore settings.

[View Logs]

Display a history of camera operations and connections to each viewer, etc.

[View Current

ettings]

Display a list of current settings for the Setting Page.

[View License]

Display information on 3rd party software licenses.

[Reboot]

Reboot the camera.

[Restore Default

ettings]

Except for the following settings, all user settings will be discarded and returned to the default settings after rebooting.

• Administrator password of the basic settings, LAN, IPv4, IPv6

• Date and Time

• Host access restrictions for security

• SSL/TLS

Display Camera Device Information and Perform
Maintenance [Maintenance]

Caution

You must not turn off the camera while [Restore Default

ettings], [Back Up

ettings] or [Restore

ettings] are in operation.

Turning off the camera at this stage may result in disabling its ability to boot correctly.

Summary of Contents for VB-M640V
































































































































































































































































































Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands

Canon VB-M640V, Operation Manual

Search results

Summary of Contents for VB-M640V

Reviews:

Related manuals for VB-M640V

Brands by name

Popular brands