E2S APPELLO A105NAX, Instruction Manual

Page: 1 / 10

INSTRUCTION MANUAL
A105NAX, AL105NAXH & AL105NAXX APPELLO
Alarm Tone and Voice Annunciation Sounder
European Safety Systems Ltd.
Impress House, Mansell Road, Acton, London W3 7QH
sales@e2s.com Tel: +44 (0)208 743 8880
www.e2s.com Fax: +44 (0)208 740 4200
Document No. D165-00-001-IS_Issue_4 16-11-22
Sheet 1 of 10
1) Introduction
The Appello tone and speech annunciation
sounder has three different styles in AC and DC.
•
A105NAX Sounder
•
AL105NAXH High Output LED
Sounder-Beacon Combination unit
•
AL105NAXX Xenon Strobe
Sounder-Beacon Combination unit
These Sounder units share a common set of
functions:-
•
4 stages, each stage can record up to 30
seconds of CD quality audio.
•
Facility to record via an on board microphone
or a line in input.
•
The recorded message can be played back
proceeded either with or without the choice
of one of forty five tones.
The Beacon functions are either:-
•
Xenon Strobe - 1Hz flash rate
•
LED - Either Steady or 2Hz blink rate
2) Operating and Marking
All
units have the following operating
requirements and limitations.
Unit Type No. Voltage Range Current
Sounder only outputs
A105NAX DC
24Vdc 10-30Vdc 256mA
Max Current 256mA @ 30Vdc
A105NAX AC 115Vac 90-260Vac 112mA
230Vac 90-260Vac 124mA
Max Current 127mA @ 260Vac
AL105NAXH / AL105NAXX combined units - Add
selected sounder & beacon currents to calculate
total current required.
Beacon only outputs
AL105NAXH DC 24Vdc 10-30Vdc 157mA
Max Current 166mA @ 30Vdc
AL105NAXH AC 115Vac 90-260Vac 60mA
230Vac 90-260Vac 35mA
Max Current 60mA @ 90Vac
AL105NAXX DC 12Vdc 10-14Vdc 500mA
24Vdc 20-28Vdc 250mA
AL105NAXX AC /-10%Vac 100mA
/-10%Vac 50mA
Operating Temp: -20 to +55

C
IP Rating: Type 4 / 4X / 3R / 13 , IP66
Marking:
3) Installation & Wiring Requirements
A105NAX
AL105NAXH / AL105NAXX
A105NAX
DC UNIT
A105NAX
AC UNIT
AL105NAXH / AL105NAXX
DC UNITS
LED (H) / XENON (X)
BEACON OPTION
AL105NAXH / AL105NAXX
AC UNITS
LED (H) / XENON (X)
BEACON OPTION