European Safety Systems Ltd.
Impress House, Mansell Road, Acton, London W3 7QH
Document No. D165-00-001-IS_Issue_4 16-11-22
Sheet 6 of 10
Quick Ref - Recording Mode (Stage 1 illustrated)
1
For Stage 1:
Set
Switch ‘S2’ positions
2,3 & 4 to 'ON'
Alternatively for :
For Stage 2:
Set
Switch ‘S2’ positions 3
& 4 to 'ON'
For Stage 3:
Set
Switch ‘S2’ positions 2
& 4 to 'ON'
For Stage 4:
Set
Switch ‘S2’ position 4 to
'ON'
To record from Line-in
instead of the on board
microphone follow above
step 1 but set
Switch ‘S2’
position 4 to OFF
2
Switch on power or
Press reset button
3a
Press action button:
Start recording
3b
Speak into microphone or
plug line-in.
It is suggested that a 5cm
gap is maintained to the
microphone.
The peak detector L.E.D
should flash regularly to
maintain a good recording
level.
However, if it stays on for
most of the time, the
recording may be distorted.
4
Press action button:
Stop recording