Canon TS5350i Series, Online Manual

Page: 87 / 456

Loading Envelopes in Rear Tray
You can load Envelope DL and Envelope Com 10 on the rear tray.
The address is automatically rotated and printed according to the envelope's direction by specifying with the
printer driver properly.
Important
• Printing of envelopes from the operation panel or from a PictBridge (Wi-Fi) compliant device is not •
supported.
• Do not use the following envelopes. They could jam in the printer or cause the printer to malfunction. •
Envelopes with an embossed or treated surface
Envelopes with a double flap
Envelopes whose gummed flaps are already moistened and adhesive
1. Prepare envelopes. 1.
• Press down on all four corners and edges of the envelopes to flatten them. •
• If the envelopes are curled, hold the opposite corners and gently twist them in the opposite •
direction.
• If the corner of the envelope flap is folded, flatten it. •
• Use a pen to press the leading edge in the inserting direction flat and sharpen the crease. •
The figures above show a side view of the leading edge of the envelope.
Important
• The envelopes may jam in the printer if they are not flat or the edges are not aligned. Make sure •
that no curl or puff exceeds 0.12 in. (3 mm).
2. Open rear tray cover (A). Pull straight up and fold back paper support (B). 2.
87