•
From computer (Windows):
•
1. Check that printer is turned on.
1.
2. Open Canon IJ Printer Assistant Tool.
2.
Opening the Maintenance Tool (Canon IJ Printer Assistant Tool)
3. Select
Custom Settings
.
3.
4. Select
Prevents paper abrasion
check box and select
OK
.
4.
5. Check message and select
OK
.
5.
•
From computer (macOS):
•
Adjust the setting to prevent paper abrasion from Remote UI.
Opening Remote UI for Maintenance
Check5
If brightness is set low, increase brightness setting and try printing again.
If you are printing with a low brightness setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.
• Printing from your computer (Windows)
•
Check the brightness setting in the printer driver.
Adjusting Brightness
• Copying
•
Check6
Is platen glass dirty?
Clean the platen glass.
Cleaning Platen and Document Cover
Check7
Is paper feed roller dirty?
Clean paper feed roller.
Note
• Cleaning the paper feed roller abrades it, so do this only when necessary.
•
Check8
Is inside of printer dirty?
During duplex printing, ink may stain the inside of the printer, smudging the printout.
Perform bottom plate cleaning to clean inside of printer.
Cleaning Inside the Printer (Bottom Plate Cleaning)
381
Summary of Contents for TS5350i Series
