Canon IR3250, Maintenance Manual

Page: 16 / 128

Loading Paper 1-5
1
Maintenance
3
Turn the paper stack over, and place it
in the paper drawer.
Align the edges of the paper, and load the
paper as shown.
IMPORTANT
• Make sure that the height of the paper
stack does not exceed the limit mark .
NOTE
• The paper drawers are designed to hold
the following types of paper.
- Upper paper drawer: LGL, LTR, B4, A4
- Lower paper drawer: 11"x17", LGL, LTR,
A3, B4, A4,
• Each paper drawer holds up to
approximately 500 sheets of paper 20-lb.
bond (80 g/m
2
).
• If the paper is curled, straighten the curl
before the paper is placed in the paper
drawer.
• For high-quality copies and printouts, use
paper recommended by Canon.
• When loading paper in the stack bypass,
the surface that was up in the package
should be face up.
• When printing on both sides of paper hav-
ing logos or other decorations, place the
printed side of the first sheet face up.
4
Hold the recessed grip on the paper
drawer, and slide the drawer all the way
in until it clicks in place.
IMPORTANT
• Make sure paper or other objects do not
obstruct the opening at the side of the
paper drawer. This may cause paper jams.
NOTE
• If printing has been interrupted because
the printer is out of paper, it will resume as
paper is loaded in the selected paper
drawer.