Canon imageRUNNER ADVANCE C3330 Series, Troubleshooting Manual, Page: 194 / 200

Copier Color | iR-ADV C3330/C3325/C3320 Series |
Method for releasing limited function of "Staple-free Staple" mode
[Symptom]
In case of jam occurrence caused by failure etc. while using "Staple-free Staple" mode, if jam codes shown below occurs two
times in a row, it automatically enters limited function mode. Once it enters limited function mode, "Staple-free Staple" mode can
never be used unless the limited function mode is released. Since the limited function mode cannot be released by the main
power OFF/ON, releasing it in service mode is required.
Jam Code Sensor Name
1801 Staple-less binding jam (Clinch Motor Drive Sensor error)
1802 Staple-less binding jam (Clinch HP Sensor error)
1803 Staple-less binding jam (Clinch Motor error)
1804 Staple-less binding jam (time-out error of binding operation)
1805 Staple-less binding jam (time-out error of return operation after binding)
[Reference]
- If the same jam code occurs two times in a row, alarm code (61-0002) [a] is reported to the main unit, and it enters the limit
function mode.
- When staple-free staple mode enters limited function mode, message [a] is displayed on LUI.
- In case staple-free staple mode is set while the function is limited, the lamp of the start button changes from [a] to [b], and staple-
free staple printing cannot be executed.
189