Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 96

Page: 96 / 160

Close the feeder covers.

1. Close the inner cover.

2. Close the feeder cover.

Remove any jammed paper inside the feeder.

1. Lift the feeder.

2. Remove any jammed paper.

3. Close the feeder.

Follow the instructions on the touch panel display.

The screen indicating the location of the paper jam repeatedly appears on the touch panel display until the

paper jam is entirely cleared.

When closing the feeder, be careful not to get your fingers caught, as this may result in personal

injury.

When closing the feeder covers, be careful not to get your fingers caught, as this may result in

personal injury.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands