Canon imageRUNNER Advance C2020i Basic Operation Manual Download Page 93

Page: 93 / 160

Troubleshooting

Remove any jammed paper inside the paper drawer’s lower right cover and

upper right cover.

1. Remove any jammed paper inside

the paper drawer’s lower right cover.

2. Remove any jammed paper inside

the paper drawer’s upper right

cover.

Remove any jammed paper inside the lower right cover of the main unit.

1. Open the lower right cover of the

main unit.

2. Remove any jammed paper.

3. Close the lower right cover of the

main unit.

Gently close the lower right cover until it clicks into place in the closed position.

When closing the covers, be careful not to get your fingers caught, as this may result in personal

injury.

Summary of Contents for imageRUNNER Advance C2020i

































































































































































Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands

Canon imageRUNNER Advance C2020i, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER Advance C2020i

Reviews:

Related manuals for imageRUNNER Advance C2020i

Brands by name

Popular brands